De Werkcon potdekselprofielen zijn samengesteld op basis van continu verzinkt staal (ook wel sendzimer staal) met een dikte van 0.70 mm of een dikte van 0.88 mm (afhankelijk van het type), waarbij de zichtzijde is voorzien van een kleurcoating van 25 µm of 35 µm, welke is aangebracht volgens...
The Werkcon Plank profiles are composed on the basis of continuous zinc-plated steel (also known as sendzimer steel) with a thickness of 0.88 mm, in which the visible side is provided with a colour coating of 25 μm or 35 μm, which is applied by a coil-coating process. The...
The Werkcon Point Profiles are composed on the basis of continuous zinc-plated steel (also known as sendzimer steel) with a thickness of 0.70 mm, in which the visible side is provided with a colour coating of 25 μm or 35 μm, which is applied by a coil-coating process. The...
The Werkcon Omega profiles are composed on the basis of continuous zinc-plated steel (also known as sendzimir steel) with a thickness of 1.00 mm or 0.88 mm (depending on the type), in which the visible side is provided with a colour coating of 25 μm or 35 μm, which...
Ridge caps, sills and corner plates. Werkcon produces all the profiles in our own factory. Correct to a millimetre, the finishing touch to your façade.